From: Mustafa M Bayramov (spyroot@azeronline.com)
Date: Sat Jun 14 2003 - 15:32:16 GMT-3
When you removing lo192 on r2 does it disappear on r1?
I've tested advertise map on 12.1.5T and work correct.
Regards
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
badger
Sent: Saturday, June 14, 2003 12:06 PM
To: ccielab@groupstudy.com
Subject: BGP advertise-map non-exist-map
Hello ccielab,
I'm using 12.1(5)T14 and can't seem to get the neighbor x.x.x.x
advertise-map non-exist-map to work. I did check the archives and
found no useful information pertaining to this problem. My
question... is there a know IOS issue with this, or are my configs
not correct?
here are the configs:
as1 as1
r1--------r2
r1
router bgp 1
no synchronization
bgp router-id 1.1.1.1
bgp log-neighbor-changes
neighbor 2.2.2.2 remote-as 1
neighbor 2.2.2.2 update-source Loopback0
neighbor 2.2.2.2 soft-reconfiguration inbound
no auto-summary
-------------
BGP table:
Network Next Hop Metric LocPrf Weight Path
*>i172.16.1.0.0/24 2.2.2.2 0 100 0 i
*>i172.16.2.0.0/24 2.2.2.2 0 100 0 i
R2
interface Loopback191
ip address 192.168.1.1 255.255.255.0
interface Loopback192
ip address 192.168.2.1 255.255.255.0
shutdown
interface Loopback171
ip address 172.16.1.1 255.255.255.0
interface Loopback200
ip address 172.16.2.1 255.255.255.0
router bgp 1
no synchronization
bgp router-id 2.2.2.2
bgp log-neighbor-changes
network 172.16.1.0
network 172.16.2.0
network 192.168.1.0
network 192.168.2.0
neighbor 1.1.1.1 remote-as 1
neighbor 1.1.1.1 update-source Loopback0
neighbor 1.1.1.1 soft-reconfiguration inbound
neighbor 1.1.1.1 advertise-map LIST non-exist-map TRACK
no auto-summary
ip access-list standard LIST
permit 192.168.1.0 0.0.0.255
ip access-list standard TRACK
permit 192.168.2.0 0.0.0.255
route-map prime LIST 10
match ip address LIST
route-map TRACK permit 10
match ip address TRACK
-------------
BGP table:
Network Next Hop Metric LocPrf Weight Path
*> 192.168.1.0 0.0.0.0 0 32768 i
*> 172.16.1.0 0.0.0.0 0 32768 i
*> 172.16.2.0 0.0.0.0 0 32768 i
------------------
Interface loop192 is shutdown, so the 192.168.1.0 should be
advertised to r1, but it isn't making it.
Thanks for any insight
-- Best regards, badger mailto:badger@pongo.org
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:58 GMT-3