From: Robert Neil (RNeil@nova-data.com)
Date: Thu Jun 12 2003 - 18:14:51 GMT-3
I'm not sure, but I seem to recall that the "debug cch323 h245" will display
the output of the capabilities exchange. That might show where the
negotiation is breaking down. Hint: look for "H245_EVENT_CAP_REJ"
Also, I think that "debug voip ccapi inout" will show capabilities exchange.
Look for something like "caps={codec=OxEBFB,... " under the cc_api_caps_ind
or cc_api_caps_ack sections.
robert
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Robert M. Neil,
CCNA, CCDA, CCNP, CCSP, CQS-IPTSS
Senior Network Engineer
Nova Electronics Data, Inc.
77 Gilcreast Road, Suite 3000
Londonderry, NH 03053
(603) 432-1555 fax: (603) 432-0542
www.nova-data.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Oliver Ziltener [mailto:ziltener@netcloud.ch]
Sent: Thursday, June 12, 2003 2:52 PM
To: ccielab@groupstudy.com
Subject: Help: Voice codec
Hello
I tested, when there is a codec mismatch between 2 dial-peer, then it is not
possible to call the remote site.
Unfortunately with "debug h245 asn1" I can see only my "local" configured
codec.
When I have no way the see the remote config, how I found out the codec code
of the remote site on my local router?
thanks Oliver
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:57 GMT-3