From: David Prall (dcp@dcptech.com)
Date: Wed Jun 11 2003 - 13:48:18 GMT-3
nobody@groupstudy.com <mailto:nobody@groupstudy.com> wrote:
> I came across this minor problem and could not find documentations.
>
> I have MSFC1 and SUP1 for 6500..
>
> And was trying to access the flash slot0: from MSFC so I can use the
> slot0: as backup.
>
> But I was not able to access the slot0: , and slot0: does not show up
> as flash device.
>
> I am able to access slot0: from sup1 module without any problem.
>
>
> Is there a special command that I can use to get access to slot0:
>
> Jin jung ...
--
David C Prall, Systems Engineer, CCIE# 6508 (R&S/C&S/Security)
dprall@cisco.com
(703) 484-5366 IP Phone {*} (703) 484-5366 Fax
(571) 212-7265 Mobile {*} (800) 365-4578 Pager
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:56 GMT-3