From: phase90 (phase90@comcast.net)
Date: Tue Jun 10 2003 - 23:27:46 GMT-3
John,
I don't see your bridge-group 5 statement on R4.
Jerry
----- Original Message -----
From: "John Matijevic" <matijevi@bellsouth.net>
To: "Jung, Jin" <jin.jung@lmco.com>; <ccielab@groupstudy.com>
Sent: Tuesday, June 10, 2003 8:07 PM
Subject: Re: irb bridging
> ok here are my configs, had me stumped all day on this one.... I
apprecatie
> any feedback.
> i can ping from r4 to r3 and from r3 to r5, i cannot ping r4 to r5.
> Sincerely,
> Matijevic
>
> r3#sh run
> Building configuration...
>
> Current configuration : 1492 bytes
> !
> version 12.1
> no service single-slot-reload-enable
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r3
> !
> logging rate-limit console 10 except errors
> !
> ip subnet-zero
> no ip finger
> !
> cns event-service server
> !
> !
> bridge irb
> !
> !
> !
> interface Ethernet0
> no ip address
> bridge-group 5
> !
> interface Serial0
> no ip address
> encapsulation frame-relay
> no ip mroute-cache
> shutdown
> no fair-queue
> no frame-relay inverse-arp
> !
> interface Serial0.1 point-to-point
> ip address 153.1.131.3 255.255.255.0
> frame-relay interface-dlci 301
> !
> interface Serial0.2 point-to-point
> ip address 153.1.132.3 255.255.255.0
>
> r3#
> comm-server#4
> [Resuming connection 4 to r4 ... ]
>
> r4#sh run
> Building configuration...
>
> Current configuration : 1418 bytes
> !
> version 12.1
> no service single-slot-reload-enable
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r4
> !
> logging rate-limit console 10 except errors
> !
> ip subnet-zero
> no ip finger
> ip tcp synwait-time 5
> no ip domain-lookup
> !
> cns event-service server
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 153.1.104.4 255.255.255.0
> shutdown
> !
> interface Ethernet0
> ip address 153.1.43.44 255.255.255.128
> !
> interface Serial0
> ip address 153.1.134.4 255.255.255.0
> encapsulation frame-relay
> shutdown
> no fair-queue
> no frame-relay inverse-arp
> !
> interface Serial0.1 point-to-point
> ip address 153.1.141.4 255.255.255.0
> frame-relay interface-dlci 401
> !
> interface Serial0.2 point-to-point
> ip address 153.1.142.4 255.255.255.0
> frame-relay interface-dlci 402
> !
> interface Serial0.3 point-to-point
> ip address 153.1.143.4 255.255.255.0
> frame-relay interface-dlci 403
> !
> interface Serial1
> no ip address
> shutdown
> !
> router rip
> version 2
> network 153.1.0.0
> !
> ip kerberos source-interface any
> ip classless
> no ip http server
> !
> !
> alias exec i show ip route
> alias exec c show running-config
> alias exec b show ip int brief
> alias exec o show ip ospf
> alias exec t config term
> alias exec srb show run | begin
> alias exec sri show run | include
> !
> line con 0
> password cisco
> logging synchronous
> login
> transport input none
> line aux 0
> password cisco
> login
> line vty 0 4
> login
> !
> end
>
> r4#
> comm-server#3
> [Resuming connection 3 to r3 ... ]
>
> r3#sh run
> Building configuration...
>
> Current configuration : 1492 bytes
> !
> version 12.1
> no service single-slot-reload-enable
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r3
> !
> logging rate-limit console 10 except errors
> !
> ip subnet-zero
> no ip finger
> !
> cns event-service server
> !
> !
> bridge irb
> !
> !
> !
> interface Ethernet0
> no ip address
> bridge-group 5
> !
> interface Serial0
> no ip address
> encapsulation frame-relay
> no ip mroute-cache
> shutdown
> no fair-queue
> no frame-relay inverse-arp
> !
> interface Serial0.1 point-to-point
> ip address 153.1.131.3 255.255.255.0
> frame-relay interface-dlci 301
> !
> interface Serial0.2 point-to-point
> ip address 153.1.132.3 255.255.255.0
> frame-relay interface-dlci 302
> !
> interface Serial0.4 point-to-point
> ip address 153.1.143.3 255.255.255.0
> frame-relay interface-dlci 304
> !
> interface Serial1
> ip address 153.1.53.67 255.255.255.128
> !
> interface BVI5
> ip address 153.1.43.33 255.255.255.128
> !
> ip kerberos source-interface any
> ip classless
> ip http server
> !
> !
> bridge 5 protocol ieee
> bridge 5 route ip
> no bridge 5 bridge ip
> alias exec b show ip int brief
> alias exec o show ip ospf
> alias exec t config term
> alias exec srb show run | begin
> alias exec sri show run | include
> alias exec i show ip route
> alias exec c show running-config
> !
> line con 0
> exec-timeout 0 0
> privilege level 15
> logging synchronous
> length 42
> transport input none
> line aux 0
> privilege level 15
> line vty 0 4
> exec-timeout 0 0
> privilege level 15
> logging synchronous
> no login
> length 42
> !
> end
>
> r3#
> comm-server#5
> [Resuming connection 5 to r5 ... ]
> [OK]
> r5#
> r5#sh run
> Building configuration...
>
> Current configuration : 974 bytes
> !
> version 12.1
> no service single-slot-reload-enable
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r5
> !
> logging rate-limit console 10 except errors
> !
> ip subnet-zero
> no ip finger
> ip tcp synwait-time 5
> no ip domain-lookup
> !
> cns event-service server
> !
> !
> !
> !
> !
> interface Ethernet0
> ip address 162.1.1.1 255.255.255.0
> shutdown
> !
> interface Serial0
> ip address 153.1.53.68 255.255.255.128
> no fair-queue
> clockrate 56000
> !
> interface Serial1
> no ip address
> shutdown
> clockrate 56000
> !
> ip kerberos source-interface any
> ip classless
> no ip http server
> !
> !
> alias exec i show ip route
> alias exec c show running-config
> alias exec b show ip int brief
> alias exec o show ip ospf
> alias exec t config term
> alias exec srb show run | begin
> alias exec sri show run | include
> !
> line con 0
> password cisco
> logging synchronous
> login
> transport input none
> line aux 0
> password cisco
> login
> transport input all
> line vty 0 4
> login
> !
> end
>
> r5#
> ----- Original Message -----
> From: "Jung, Jin" <jin.jung@lmco.com>
> To: "'John Matijevic'" <matijevi@bellsouth.net>; <ccielab@groupstudy.com>
> Sent: Tuesday, June 10, 2003 2:48 PM
> Subject: RE: irb bridging
>
>
> > Well,, its kind a hard to troubleshoot without the configs..
> >
> > But make sure you have
> > Bridge 1 protocol ieee
> > Bridge 1 route ip
> > Bridge 1 irb
> >
> > And bridge-group 1 on interfaces
> >
> > And BVI interface on R3
> >
> > Jin jung...
> >
> > -----Original Message-----
> > From: John Matijevic [mailto:matijevi@bellsouth.net]
> > Sent: Tuesday, June 10, 2003 12:02 PM
> > To: ccielab@groupstudy.com
> > Subject: irb bridging
> >
> >
> > Hello Team I have the following scenerio:
> > R4----R3------R5,
> > R4 is conntected to R3 via ethernet.
> > R3 is connected to R5 via serial, a serperate ip network than R4 tp R3.
my
> > goal is to ping r5 from r4. R3 e0 does not have an ip address, I have
> > configured the bridging on R3, I have configured the bvi ip address to
the
> > same network as R4 ip address. However, I am still not able to ping, I
> tried
> > to enable bridging on R4, but I it still does not work. Any suggestions?
> > Sincerely, Matijevic
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:56 GMT-3