From: Jonathan V Hays (jhays@jtan.com)
Date: Mon Jun 09 2003 - 17:23:05 GMT-3
Hi 878012014064356,
Sorry, but the command you suggested works on a Crescendo-type-interface
(Set/Clear) switch, such as the 6509, and will *not* work on the
Catalyst 3550.
The "spanning-tree vlan vlan-id root" command is how it's done on the
new IOS-interface-type switches. You can also set the priority on a
per-VLAN basis, with the "spanning-tree vlan vlan-id priority" command.
See the Catalyst 3550 Software Configuration Guide for a discussion of
the tradeoffs between using these two commands.
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12113ea1/3550s
cg/swstp.htm#1039614
Jonathan
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of 878012014064356
> Sent: Monday, June 09, 2003 10:44 AM
> To: Emad; CCIE LAB (E-mail)
> Subject: Re: CAT3550
>
>
> On Mon, 9 Jun 2003 12:19:13 +0300
> "Emad" <emad@zakq8.com> wrote:
> >Folks,
> >How can we configure STP on 3550 switch such that it
> >ignores BPDUs from other root switches
> >
> >Thanx
>
> 'set spantree root'?
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:55 GMT-3