From: Kevin Tang (Kevin.Tang@telecom.co.nz)
Date: Sun Jun 08 2003 - 19:20:55 GMT-3
Hi,
I have a few modules installed in a Cisco 4500 router. I want get the serial number for the modules without open the case.
Does any one know the command?
Kevin
=====
R4#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 4500 Software (C4500-JS-M), Version 12.1(10), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 06-Aug-01 19:20 by kellythw
Image text-base: 0x60008958, data-base: 0x60FB2000
ROM: System Bootstrap, Version 5.2(7b) [mkamson 7b], RELEASE SOFTWARE (fc1)
BOOTLDR: 4500 Bootstrap Software (C4500-BOOT-M), Version 10.3(7), RELEASE SOFTWA
RE (fc1)
R4 uptime is 22 hours, 31 minutes
System returned to ROM by reload at 11:05:33 UTC Thu Jun 6 2002
System image file is "flash:c4500-js-mz.121-10.bin"
cisco 4500 (R4K) processor (revision B) with 32768K/8192K bytes of memory.
Processor board ID 03448266
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
G.703/E1 software, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 FastEthernet/IEEE 802.3 interface(s)
8 Serial network interface(s)
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
4096K bytes of processor board Boot flash (Read/Write)
Configuration register is 0x2102
------------------------------------------------------------------------------
"This communication, including any attachments, is confidential.
If you are not the intended recipient, you should not read
it - please contact me immediately, destroy it, and do not
copy or use any part of this communication or disclose
anything about it. Thank you."
------------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:55 GMT-3