From: Brian Dennis (brian@labforge.com)
Date: Thu Jun 05 2003 - 17:36:37 GMT-3
<CCO>
Important: After the first password prompt is presented, you have 30
seconds to complete the recovery procedure in Steps 3 - 7 below. Because
you only have 30 seconds to complete this procedure, you will press
Enter whenever the switch prompts you for an old or new password.
Pressing Enter at the password prompt is the equivalent of entering a
null character. This will allow you to complete the recovery quickly.
</CCO>
http://www.cisco.com/warp/public/474/pswdrec_6000.html
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joseph Rinehart
Sent: Thursday, June 05, 2003 11:30 AM
To: ccielab@groupstudy.com
Subject: Password Recovery on a Catalyst 5500
Ran into something interesting with the company I used to work for, they
have
a Cat 5500 that they need to do password recovery on but all the
recovery
procedures on CCO ask for the old password. Any suggestions?
Joe
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:53 GMT-3