From: Tim Shortall (TimS@InfoStructures.com)
Date: Wed Jun 04 2003 - 12:53:53 GMT-3
Danny,
I'm surprised that you were able to get the neighbors established. I
agree with Tim that they effectively are on uncommon subnets. I tried
several approaches unsuccessfully. What configuration did you use to
form the neighbor adjacencies?
thanks,
Tim
>>> <Danny.Andaluz@triaton-na.com> 06/04/03 09:26AM >>>
Thanks for all the responses, guys. I tried this in my lab and what I
found is that they will become neighbors but no routes are learned.
Danny
-----Original Message-----
From: Snow, Tim [mailto:timothy.snow@eds.com]
Sent: Wednesday, June 04, 2003 12:23 AM
To: Andaluz, Danilo, Triaton/NA
Cc: 'ccielab@groupstudy.com'
Subject: RE: OSPF with secondary IP's
Negative, you'll get errors due to the fact that the router will source
the OSPF hellos (assuming you put the primary into a OSPF area) from the
primary interfaces. Much the same way you'll see "not on common subnet"
errors with EIGRP.
Tim
-----Original Message-----
From: Danny.Andaluz@triaton-na.com
[mailto:Danny.Andaluz@triaton-na.com]
Sent: Tuesday, June 03, 2003 4:01 PM
To: ccielab@groupstudy.com
Subject: OSPF with secondary IP's
Hello, Group.
R1------R2
R1
ip address 1.1.1.1 255.255.255.0
ip address 2.2.2.2 255.255.255.0 secondary
R2
ip address 2.2.2.1 255.255.255.0
ip address 1.1.1.2 255.255.255.0 secondary
Both networks are under OSPF in the same area. Will the two routers
become adjacent?
Thanks,
Danny
Danny Andaluz, CCNP
Network Engineer
Triaton, North America
908-541-6522
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:53 GMT-3