From: Brian Dennis (brian@labforge.com)
Date: Wed Jun 04 2003 - 17:59:06 GMT-3
You do not need to configure the other side. The routers will use the
lowest configured value between the two.
If you don't mind me asking why do you want to adjust the timers?
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joe Carr
Sent: Wednesday, June 04, 2003 12:17 PM
To: ccielab@groupstudy.com
Subject: BGP timers
This is about the timer command for a BGP neighbor. If I set the timer
for one end do I have to set it on the other neighbor or will both
keepalive and holdtime be negotiated when only configured for one peer?
This is in a production environment where we do not have access to the
ISP routers and we are peered to four providers. I would like to to
adjust the timers without the ISPs getting involved.
Joe
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:52 GMT-3