From: Nammalwar, Purush (Purush.Nammalwar@Norstan.com)
Date: Wed Jun 04 2003 - 17:20:45 GMT-3
Hi ,
Can someone recommend the ATM interfaces that can be used in the CCIE
practice labs ?
What kind of interfaces you guys have in your lab equipment ?
(if you can include the platform info, that will be great).
I have a LS1010 for the ATM switch. I need to find out what interfaces I
would need on the router side.
Does anyone use 3810's MFT T1 interface for ATM ?
Any info/comments on the above statement are appreciated.
TIA
Purush
-----Original Message-----
From: Lin Xiaodong [mailto:Linxiaodong@21Vianet.com]
Sent: Monday, May 26, 2003 5:20 AM
To: frank@buff-net.com; ccielab@groupstudy.com
Subject: Re: ATM SVC
I've seen the state: up and normal from command "show atm ilmi-st", and
got
the prefix from the other end. but the remote end's ip add is shown
"peer
ip add 192.168.1.2".
why, what's matter? why is it not "172.16.1.2", maybe 172.16.1.2 is sec
address, is it possible? I still cannot ping the other end :(
----- Original Message -----
From: "Frank B" < frank@buff-net.com <mailto:frank@buff-net.com>>
To: "'Lin Xiaodong'" < Linxiaodong@21Vianet.com
<mailto:Linxiaodong@21Vianet.com>>
Cc: < ccielab@groupstudy.com <mailto:ccielab@groupstudy.com>>
Sent: Friday, May 23, 2003 4:58 PM
Subject: RE: ATM SVC
> Where you have the svc nsap below, ensure you place the nsap from the
> router at the other end of your svc.
>
> You can verify it's working by using show atm ilmi-status
>
> You should see ilmi state: UpandNormal
> And after the registered esi address it should say (confirmed)
>
> Frank
>
> -----Original Message-----
> From: nobody@groupstudy.com <mailto:nobody@groupstudy.com>
[mailto:nobody@groupstudy.com] On Behalf Of
> Lin Xiaodong
> Sent: Thursday, May 22, 2003 7:47 PM
> To: ccielab@groupstudy.com <mailto:ccielab@groupstudy.com>
> Subject: ATM SVC
>
> hi boddies,
> I config the atm svc as following but why i cannot always ping the
> remote end successfully ?
> maybe somewhere is wrong ? who can help me ? my config as follows
>
> int atm 2/0
> ip add 172.16.1.1 255.255.255.0
> atm esi-add xxxx.xxxx.xxxx.00
> pvc 0/16 ilmi
> !
> pvc 0/5 qusaal
> !
> atm ilmi-keepalive
> !
> atm arp-server self
> !
> svc nsap xx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.00
> proto ip 172.16.1.2 bro
> enc aal5snap
> !
>
> thanks in advance
In accordance with Norstans Anti-Virus Policy, this e-mail has been scanned
for viruses. This banner message will appear each time the e-mail is
scanned.
In accordance with Norstans Anti-Virus Policy, this e-mail has been scanned for viruses. This banner message will appear each time the e-mail is scanned.
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:52 GMT-3