From: Danny.Andaluz@triaton-na.com
Date: Tue Jun 03 2003 - 11:55:12 GMT-3
David,
Even so, it should still not work. The other side doesn't have anything configured as far as authentication.
-----Original Message-----
From: David Cho [mailto:David.Cho@interealty.com]
Sent: Tuesday, June 03, 2003 9:37 AM
To: Andaluz, Danilo, Triaton/NA; ccielab@groupstudy.com
Subject: RE: Eigrp route authentication
You have a space at the end of cisco.
-----Original Message-----
From: Danny.Andaluz@triaton-na.com [mailto:Danny.Andaluz@triaton-na.com]
Sent: Monday, June 02, 2003 11:22 PM
To: ccielab@groupstudy.com
Subject: Eigrp route authentication
Hello, Group. I am seeing something unexpected with eigrp authentication. I have the authentication configured on only one end of a point to point serial link, but the routes from the unconfigured end still come through. See config below. Am I missing something? I have checked my answers against the lab book and they are exactly the same.
R1
key chain cisco
key 1
key-string test
!
interface Serial0
ip address 1.1.1.1 255.255.255.224
ip authentication mode eigrp 1 md5
ip authentication key-chain eigrp 1 cisco
no fair-queue
R2
interface Serial0
ip address 1.1.1.2 255.255.255.224
no fair-queue
Thanks,
Danny
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:52 GMT-3