From: Messina, John V (john@crimsoncti.com)
Date: Mon Jun 02 2003 - 20:55:53 GMT-3
For obvious reasons I have never used T by itself but even if that does work a more effecient method for the scenario you desribe would be to use
....
this will route the call as soon as it matches
with T it will wait until the interdigit timeout which defaults to 10 seconds
-----Original Message-----
From: CNLink Technical [mailto:tech_support@us.cnlink.net]
Sent: Mon 6/2/2003 3:37 PM
To: ccielab@groupstudy.com
Cc:
Subject: RE: VoIP dial-peer question
Also
+(Optional) Character indicating an E.164 standard number.
Be sure to read this page completely
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/vvfa
x_c/int_c/dpeer_c/dp_confg.htm
JC Cham
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
McCallum, Robert
Sent: Monday, June 02, 2003 6:51 AM
To: 'Juan Manuel Munarriz Gonzalez'; ccielab@groupstudy.com
Subject: RE: VoIP dial-peer question
T
> -----Original Message-----
> From: Juan Manuel Munarriz Gonzalez [mailto:munarriz@satec.es]
> Sent: 02 June 2003 13:13
> To: ccielab@groupstudy.com
> Subject: VoIP dial-peer question
>
>
> Hello,
>
> I4ve seen in a lab test training a problem with a router with
> two FXS ports and a VoIP dial-peer with extensisn 3002. The
> router must be configure to reach the extensisn 3002 without
> configuring a specified number. Beside this it asks for
> configure E164 style.
> Have you got any idea about such dial-peer configuration?.
>
> Thanks in advance
> ____________________________________________
>
> Juan Manuel Munarriz Gonzalez
> Dpto. Ingenieria de red
> email: munarriz@satec.es
>
> SATEC/CONVEX
> Avda. Europa 34 A
> 28023 Aravaca MADRID (SPAIN)
> Tlf.: +34 91 708 90 00 | +34 91 211 03 00
> Fax.: +34 91 708 90 90 | +34 91 211 03 90
> ____________________________________________
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:51 GMT-3