NAT overload with secondary address

From: Oliver Ziltener (ziltener@netcloud.ch)
Date: Sat May 31 2003 - 13:11:43 GMT-3

• Next message: Oliver Ziltener: "Multicast: Sparse-mode over FR?"
• Previous message: Oliver Ziltener: "3550: Discard encapsulated tagged packet"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello

The solution from iPexpert show all the time when configuring PAT a secundary
address.

Do you agree with me, that we DONT need this secondary address on the e1/0
interface?

interface Ethernet1/0
 ip address 10.90.90.1 255.255.255.240 secondary
 ip address 172.31.90.129 255.255.255.240
 ip nat inside

interface ATM0/0
 ip address 172.31.69.2 255.255.255.252
 ip nat outside
 ip ospf priority 0
 no atm ilmi-keepalive
 pvc 0/101
  protocol ip 172.31.69.1 broadcast

ip nat inside source list 3 interface ATM0/0 overload
access-list 3 permit 10.90.90.0 0.0.0.15

• Next message: Oliver Ziltener: "Multicast: Sparse-mode over FR?"
• Previous message: Oliver Ziltener: "3550: Discard encapsulated tagged packet"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:51 GMT-3