From: OhioHondo (ohiohondo@columbus.rr.com)
Date: Sun Jun 01 2003 - 14:04:21 GMT-3
I'm assuming the other methods (static route, steering) are to the "host" IP
address of the DLCI. Is that correct? A short example wouldn't hurt.
p.s. I appreciate Dennis mentioning alternatives. Note that this subject has
been discussed many times since I've been in this group and I don't remember
alternatives being mentioned.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Mike Williams
Sent: Sunday, June 01, 2003 9:36 AM
To: 'Charles Church'
Cc: CCIELab@Groupstudy.com
Subject: RE: Frame-relay Map
The only problem with someone saying "Oh, there's a way, but I'm not
going to mention what that might be" is that sometimes you come across
probably that are full of it, and then you end up being misled by
misinformation and wasting valuable time on a goose chase. Now granted
we all know Brian here and that's not likely true in this case.
I appreciate that the list is for learning, but not everyone's learning
style is the same. I don't need riddles and mysteries, I need
information that I can then quickly take and research to learn. For my
learning benefit saying "Yes you can. There are other ways besides just
using a map statement." was not helpful. Saying "Possible solutions:
policy-routing, static route, dynamic route" is helpful, as I now I can
go and try them out on a rack, and really understand why these solutions
are solutions. So, although some people might say "Well, you just want
the answers handed to you so you don't have to learn", my response is "I
want to know the answers so I can research and learn WHY the answer is
the answer", a perfectly valid learning style, not a cheat or lazy way
out as some may think.
My 2 cents.
Mike W.
-----Original Message-----
From: Charles Church [mailto:cchurch@wamnet.com]
Sent: Sunday, June 01, 2003 5:43 AM
To: Mike Williams; 'Brian Dennis'; ccielab@groupstudy.com
Subject: RE: Frame-relay Map
Because it forces people to think about it, which is crucial to
learning.
"You can route a packet for a man, and he's OK for a couple
milliseconds. But teach a man to route, and he's good for life."
Chuck Church
CCIE #8776, MCNE, MCSE
Wam!Net Government Services
13665 Dulles Technology Dr. Ste 250
Herndon, VA 20171
Office: 703-480-2569
Cell: 585-233-2706
cchurch@wamnet.com
PGP key:
http://pgp.mit.edu:11371/pks/lookup?search=chuck+church&op=index
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Mike Williams
Sent: Saturday, May 31, 2003 1:12 PM
To: 'Brian Dennis'; ccielab@groupstudy.com
Subject: RE: Frame-relay Map
Like?!?!?!? Why would you point out there are other ways besides using
a map statement, then not even mention it/them?!?!?!
Mike W.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brian Dennis
Sent: Saturday, May 31, 2003 10:22 AM
To: 'Tony Schaffran'; 'Ciscolab'; ccielab@groupstudy.com
Subject: RE: Frame-relay Map
Yes you can. There are other ways besides just using a map statement.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tony Schaffran
Sent: Saturday, May 31, 2003 5:55 AM
To: 'Ciscolab'; ccielab@groupstudy.com
Subject: RE: Frame-relay Map
You cannot ping your local interface if you do not map it.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:51 GMT-3