From: Brian Dennis (brian@labforge.com)
Date: Sat May 31 2003 - 12:22:03 GMT-3
Yes you can. There are other ways besides just using a map statement.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tony Schaffran
Sent: Saturday, May 31, 2003 5:55 AM
To: 'Ciscolab'; ccielab@groupstudy.com
Subject: RE: Frame-relay Map
You cannot ping your local interface if you do not map it.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ciscolab
Sent: Friday, May 30, 2003 10:01 PM
To: ccielab@groupstudy.com
Subject: Frame-relay Map
Hello, Group,
When I map the frame-relay DLCI to IP address of remote mode, is there
any
requirement to map the local IP address to the DLCI also, thanks.
!!!!!!!!!!!!!!!!Ciscolab
!!!!!!!!!!!!!!!!ciscolab@vip.sina.com
!!!!!!!!!!!!!!!!!!!!2003-05-31
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:51 GMT-3