RE: dialer watch

From: Danny.Andaluz@triaton-na.com
Date: Sat May 31 2003 - 11:56:43 GMT-3

• Next message: badger: "List Down ?"
• Previous message: Charles Church: "RE: Congestion"
• Maybe in reply to: Danny.Andaluz@triaton-na.com: "dialer watch"
• Next in thread: Brian Dennis: "RE: dialer watch"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thanks, Brian.

Danny

-----Original Message-----
From: Brian Dennis [mailto:brian@labforge.com]
Sent: Saturday, May 31, 2003 4:25 AM
To: Andaluz, Danilo, Triaton/NA; ccielab@groupstudy.com
Subject: RE: dialer watch

Yes, a dialer string will work fine.

Also note that the dialer string under a physical BRI doesn't work without PPP.

Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Danny.Andaluz@triaton-na.com
Sent: Friday, May 30, 2003 11:32 PM
To: ccielab@groupstudy.com
Subject: dialer watch

In configuring dialer watch, I used a dialer string instead of a dialer map to the watched route. It worked perfectly. Is this config valid as well as a config using a dialer map to the watched route?

Thanks,
Danny

• Next message: badger: "List Down ?"
• Previous message: Charles Church: "RE: Congestion"
• Maybe in reply to: Danny.Andaluz@triaton-na.com: "dialer watch"
• Next in thread: Brian Dennis: "RE: dialer watch"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:51 GMT-3