From: Oliver Ziltener (ziltener@netcloud.ch)
Date: Thu May 29 2003 - 13:45:10 GMT-3
Hello
what kind of release do I have to run to use the cmd "bgp bestpath as-path
ignore"?
I don't have this option.
R7(config-router)#bgp bestpath ?
compare-routerid Compare router-id for identical EBGP paths
med MED attribute
thnx
Oliver
R7#show ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JK2O3S-M), Version 12.1(5)T9, RELEASE
SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Sun 24-Jun-01 08:57 by cmong
Image text-base: 0x80008088, data-base: 0x814CE3A0
ROM: System Bootstrap, Version 11.3(2)XA3, PLATFORM SPECIFIC RELEASE SOFTWARE
(fc1)
R7 uptime is 8 hours, 41 minutes
System returned to ROM by reload at 19:27:15 UTC Sat May 10 2003
System image file is "flash:c2600-jk2o3s-mz.121-5.T9.bin"
cisco 2611 (MPC860) processor (revision 0x202) with 59392K/6144K bytes of
memory.
Processor board ID JAB024801JE (1101573745)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
2 Voice FXS interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
R7#
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:50 GMT-3