OT: basic isdn problem

From: Szeto Jeff (jytszeto@hotmail.com)
Date: Wed May 28 2003 - 03:27:52 GMT-3


Hi,

Please help.

R5:

username R6 password 0 cisco

interface BRI1/0
ip address 1.1.1.5 255.255.255.0
encapsulation ppp
dialer map ip 1.1.1.6 name R6 broadcast 6001
dialer map ip 1.1.1.6 name R6 broadcast 6002
dialer-group 1
isdn switch-type basic-ni
isdn spid1 5101 5001
isdn spid2 5102 5002
ppp authentication pap

dialer-list 1 protocol ip permit

R6

username R5 password 0 cisco

interface BRI0
ip address 1.1.1.6 255.255.255.0
encapsulation ppp
dialer map ip 1.1.1.5 name R5 broadcast 5001
dialer map ip 1.1.1.5 name R5 broadcast 5002
dialer-group 1
isdn switch-type basic-ni
isdn spid1 6101 6001
isdn spid2 6102 6002
ppp authentication pap

dialer-list 1 protocol ip permit

The isdn switch is a nortel pbx.

Here is the debug dialer message on R5:

R5#ping 1.1.1.6

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.6, timeout is 2 seconds:

00:14:47: BR1/0 DDR: Dialing cause ip (s=1.1.1.5, d=1.1.1.6)
00:14:47: BR1/0 DDR: Attempting to dial 6001
00:14:47: ISDN BR1/0: Outgoing call id = 0x8006, dsl 8
00:14:47: ISDN BR1/0: Event: Call to 6001 at 64 Kb/s
00:14:47: ISDN BR1/0: process_bri_call(): call id 0x8006, called_number
6001, sp
eed 64, call type DATA
00:14:47: CCBRI_Go Fr Host InPkgInfo (Len=19) :
00:14:47: 1 8 1 80 6 0 4 2 88 90 18 1 83 2C 4 36 30 30 31
00:14:47:
00:14:47: CC_CHAN_GetIdleChanbri: dsl 8
00:14:47: Found idle channel B1
00:14:47: CCBRI_Go Fr L3 pkt (Len=7) :
00:14:47: 2 1 5 98 18 1 89
00:14:47:
00:14:47: ISDN BR1/0: LIF_EVENT: ces/callid 1/0x8006 HOST_PROCEEDING.....
Success rate is 0 percent (0/5)
R4-3640#
00:15:09: CCBRI_Go Fr L3 pkt (Len=11) :
00:15:09: 45 1 5 96 8 2 81 90 34 1 3F
00:15:09:
00:15:09: ISDN BR1/0: LIF_EVENT: ces/callid 1/0x8006 HOST_DISCONNECT
00:15:09: ISDN BR1/0: Event: Call to 6001 was hung up.
00:15:09: ISDN BR1/0: process_disc_ack(): call id 0x8006, ces 1, call type
DATA
cause 0x0
00:15:09: ISDN: get_isdn_service_state(): idb 0x61ECB0B8 bchan 2 is_isdn 1
Not a
Pri
00:15:09: BRI1/0: wait for isdn carrier timeout, call id=0x8006
00:15:09: BR1/0 DDR: Attempting to dial 6002
00:15:09: ISDN BR1/0: Outgoing call id = 0x8007, dsl 8
00:15:09: CCBRI_Go Fr Host InPkgInfo (Len=10) :
00:15:09: 6 8 1 80 6 0 8 2 0 8
00:15:09:
00:15:09: ISDN BR1/0: Event: Call to 6002 at 64 Kb/s
00:15:09: ISDN BR1/0: process_bri_call(): call id 0x8007, called_number
6002, sp
eed 64, call type DATA
00:15:09: CCBRI_Go Fr Host InPkgInfo (Len=19) :
00:15:09: 1 8 1 80 7 0 4 2 88 90 18 1 83 2C 4 36 30 30 32
00:15:09:
00:15:09: CC_CHAN_GetIdleChanbri: dsl 8
00:15:09: Found idle channel B2
00:15:09: CCBRI_Go Fr L3 pkt (Len=7) :
00:15:09: 5A 1 5 99 34 1 3F
00:15:09:
00:15:09: ISDN BR1/0: LIF_EVENT: ces/callid 1/0x8006 HOST_DISCONNECT_ACK
00:15:09: ISDN: get_isdn_service_state(): idb 0x61ECB0B8 bchan 2 is_isdn 1
Not a
Pri
00:15:09: ISDN BR1/0: HOST_DISCONNECT_ACK: call type is DATA
00:15:09: CCBRI_Go Fr L3 pkt (Len=7) :
00:15:09: 2 1 6 98 18 1 89
00:15:09:
00:15:09: ISDN BR1/0: LIF_EVENT: ces/callid 1/0x8007 HOST_PROCEEDING
00:15:31: CCBRI_Go Fr L3 pkt (Len=11) :
00:15:31: 45 1 6 96 8 2 81 90 34 1 3F
00:15:31:
00:15:31: ISDN BR1/0: LIF_EVENT: ces/callid 1/0x8007 HOST_DISCONNECT
00:15:31: ISDN BR1/0: Event: Call to 6002 was hung up.
00:15:31: ISDN BR1/0: process_disc_ack(): call id 0x8007, ces 1, call type
DATA
cause 0x0
00:15:31: ISDN: get_isdn_service_state(): idb 0x61ECB0B8 bchan 2 is_isdn 1
Not a
Pri
00:15:31: BRI1/0: wait for isdn carrier timeout, call id=0x8007
00:15:31: CCBRI_Go Fr Host InPkgInfo (Len=10) :
00:15:31: 6 8 1 80 7 0 8 2 0 8
00:15:31:
00:15:31: CCBRI_Go Fr L3 pkt (Len=7) :
00:15:31: 5A 1 6 99 34 1 3F
00:15:31:
00:15:31: ISDN BR1/0: LIF_EVENT: ces/callid 1/0x8007 HOST_DISCONNECT_ACK
00:15:31: ISDN: get_isdn_service_state(): idb 0x61ECB0B8 bchan 2 is_isdn 1
Not a
Pri
00:15:31: ISDN BR1/0: HOST_DISCONNECT_ACK: call type is DATA

I think the second last message is something related to the problem. But I
am not familiar with the pbx system, so I cannot fix it.
Any suggestion is appreciated.

Thank you in advance.

Regards,

Jeff



This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:49 GMT-3