From: Fanglo MA (fangloma@pacific.net.hk)
Date: Wed May 28 2003 - 05:59:51 GMT-3
Thanks for reply. My asking because my simulator force me to call each
channel with it's own number. If it is depending on the switch then how we
check it out when during the lab we need to configure with different
dialer string or not? In HKG, we are not using basic-ni and we are using
one number to bring up both channel. Anyone would share basic-ni feature
in their area?
TIA,
Fanglo
_____________________________________________
Little minds are interested in extraordinary;
great minds in the commonplace.
- Elbert Hubbard.
On Tue, 27 May 2003, Larson, Chris wrote:
> Also the protocol used. If using hdlc with ISDN it always uses both B
> channels for any single destination.
>
> > -----Original Message-----
> > From: Tim Fletcher [SMTP:tim@fletchmail.net]
> > Sent: Tuesday, May 27, 2003 2:16 PM
> > To: Fanglo MA; ccielab@groupstudy.com
> > Subject: Re: basic-ni
> >
> > Fanglo,
> >
> > The answer is dependent on the switch.
> >
> > -Tim Fletcher
> >
> > At 08:08 AM 5/28/2003 +0800, Fanglo MA wrote:
> > >Dear group,
> > >
> > >For ISDN swich-type basic-ni, the connection is per channel, i.e. one
> > >dialer string to access one destination B-channel, or is per distination,
> > >i.e. one dialer string to access both destination B-channels?
> > >
> > >TIA,
> > >Fanglo
> > >
> > >_____________________________________________
> > >Little minds are interested in extraordinary;
> > >great minds in the commonplace.
> > >- Elbert Hubbard.
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:49 GMT-3