答复: isis sample

From: Lin Xiaodong (Linxiaodong@21Vianet.com)
Date: Mon May 26 2003 - 06:37:03 GMT-3

Brian

R3 "no arp frame-relay" has another benefit?
if i was requested to close dynamic arp on frame-relay, i must write "no
frame inver" and "no arp frame" same time ? thanks a lot

-----ee' i.d;6-----
ed;6d::: Brian Dennis [mailto:brian@labforge.com]
eif6i4: 2003e945f26f% 13:20
f6d;6d::: 'Tom Young'; ccielab@groupstudy.com
d8;i": RE: isis sample

R1
interface Serial0/0.1 multipoint
 ip address 144.6.13.1 255.255.255.0
 ip router isis
 frame-relay map clns 113 broadcast
 frame-relay map ip 144.6.13.3 113 broadcast
!

R3
interface Serial0/0
 ip address 144.6.13.3 255.255.255.0
 ip router isis
 encapsulation frame-relay
 no arp frame-relay
 frame-relay map clns 311 broadcast
 frame-relay map ip 144.6.13.1 311 broadcast
 no frame-relay inverse-arp
!

Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tom Young
Sent: Sunday, May 25, 2003 8:20 PM
To: ccielab@groupstudy.com
Subject: isis sample

Hi, group

  Who can give me a sample that one router use
subinterface to connecting another one using phsical
interface for running isis, as below

RouterA S0.1---------------RouterB S0

I couldn't make it out.

Thanks alot

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:48 GMT-3