From: netchild ccie (netchildccie@hotmail.com)
Date: Sun May 25 2003 - 01:01:19 GMT-3
Hi,
You are right. I performed "sh ver" command
cisco 2611XM (MPC860) processor (revision 0x100) with 53248K/12288K bytes of
memory.
Processor board ID JAD06330676 (1549380734)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
8 Low-speed serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
It is low speed serial.
Thanx for all,
NetChild,
>From: "Tony Schaffran" <tschaffran@cconlinelabs.com>
>Reply-To: "Tony Schaffran" <tschaffran@cconlinelabs.com>
>To: "'netchild ccie'" <netchildccie@hotmail.com>, <ccielab@groupstudy.com>
>Subject: RE: Configure clock rate
>Date: Sat, 24 May 2003 14:24:57 -0700
>
>Is it a high speed serial interface, or is it a serial
>asynchronous/synchronous? If it is a serial a/s, the highest speed that
>you
>can configure is 128k. This would be like on a 2520 that has two high
>speed
>and two a/s serial ports.
>
>Tony Schaffran
>Network Analyst
>CCIE #11071
>CCNP, CCNA, CCDA
>NNCDS, NNCSS, CNE, MCSE
>
>http://www.cconlinelabs.com/
>Your #1 choice for online cisco rack rentals.
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>netchild ccie
>Sent: Saturday, May 24, 2003 10:43 AM
>To: ccielab@groupstudy.com
>Subject: Configure clock rate
>
>Hi there,
>
>I'm trying to configure clock rate on frame relay switch as 256k. The
>router
>
>showed me an error message.
>
>bb1(config-if)#clock rate 256000
>%Error: Unsupported clock rate for this interface
>
>when I used "?" it shows that I can configure till 4000000 ?
>
>bb1(config-if)#clock rate ?
> Speed (bits per second)
> 300
> 1200
> 2400
> 4800
> 9600
> 14400
> 19200
> 28800
> 32000
> 38400
> 56000
> 57600
> 64000
> 72000
> 115200
> 128000
>
> <300-4000000> Choose clockrate from list above
>
>Do I have to pick a value from the above list or a correct value between
>300-4000000 ?
>
>thanx
>NetChild,
>
>_________________________________________________________________
>Add photos to your messages with MSN 8. Get 2 months FREE*.
>http://join.msn.com/?page=features/featuredemail
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:47 GMT-3