From: Jung, Jin (jin.jung@lmco.com)
Date: Fri May 23 2003 - 09:54:12 GMT-3
While back, someone told me that ppp multilink and IPSEC does not work well
together,
Can is anyone using ppp multilink and IPSEC together?
And Do you have any problems?
Thanks,
-----Original Message-----
From: Mike Williams [mailto:ccie2be@swbell.net]
Sent: Friday, May 16, 2003 6:27 PM
To: 'Jung, Jin'
Cc: CCIELab@Groupstudy.com
Subject: RE: Load balance 2 T1s using Tunnel..
It seems you could still use multilink if you apply the encryption settings
to the Virtual Interface created by the multilink bundle (i.e. Setup and use
a virtual template for your PPP mulilink, and the T1s will be combined into
a single Virtual Interface) This should avoid the mismatched passwords as
there would only be one.
Mike W.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jung, Jin
Sent: Friday, May 16, 2003 10:35 AM
To: 'Tim Fletcher'; ccielab@groupstudy.com
Subject: RE: Load balance 2 T1s using Tunnel..
If I do multilink,
Since packet can take either T1 to,
Crypto map password does not match for some packets and will have to
retransmitt. And will not work..
Jin jung...
-----Original Message-----
From: Tim Fletcher [mailto:tim@fletchmail.net]
Sent: Friday, May 16, 2003 11:18 AM
To: Jung, Jin; ccielab@groupstudy.com
Subject: Re: Load balance 2 T1s using Tunnel..
How about combining them into a multilink interface?
-Tim Fletcher #11406
At 08:31 AM 5/16/2003 -0400, Jung, Jin wrote:
>I am not sure this is possible, if any one have this setup , please let
>me know.
>
>I have 2 T1s with IPSEC,
>And Have 2 tunnels for each T1,
>
>Due to a IPSEC configuration, I am unable to load balance between these
>two links.
>-- crypto password mismatch-- can not do multilink,...
>
>I will like to load balance between them,
>And I was thinking, If I use tunnel interface with loopback address as
>source and dest. And crypto map of course.
>
>I may be able to load balance after all with single tunnel interface.
>
>
>R1 loop0 =============== R2 loop0
>
>Does anyone has experience with this kind of setup?
>
>Thanks....
>
>
>
>Jin Jung
>Enterprise Information Services
>Network Infrastructure engineer
>Office: 301-640-3247
>Have a great day
>l
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:46 GMT-3