From: Adam Asay (aasay@cerberian.com)
Date: Tue May 20 2003 - 14:49:48 GMT-3
John,
I am assuming you want to have a shortcut that when selected will log
you onto one of the routers connected to your 2509. If this is what you
want to do, it is very simple. You can do this under the properties of
you console connection in CRT. There is a login script option, here you
can type the prompt you expect to see on the router:
ex comserver#
and then tell CRT what command you would like to send to the router:
ex r1
I hope this helps, and if you still have problems let me know, and I
will see if I can get you some screen shots.
Adam Asay
Sr Systems Engineer
www.cerberian.com
On Tue, 2003-05-20 at 10:16, Bigelow, John wrote:
> Does anyone know how to set up Secure CRT (the program used at RTC
> for viewing multiple router sessions) I have kept my lab and wish to make it
> more convenient to view things I am testing. I have a copy but cannot figure
> out how to use it with my 2509.
> Thanks,
>
> John B Bigelow CCIE #10565 MCSE
> Network Analyst II
> Enterprise Deployment
> John.Bigelow@BCBSFL.com
> x - 904-363-5401
> NAS-161
>
>
>
> Blue Cross Blue Shield of Florida, Inc., and its subsidiary and affiliate companies are not responsible for errors or omissions in this e-mail message. Any personal comments made in this e-mail do not reflect the views of Blue Cross Blue Shield of Florida, Inc. The information contained in this document may be confidential and intended solely for the use of the individual or entity to whom it is addressed. This document may contain material that is privileged or protected from disclosure under applicable law. If you are not the intended recipient or the individual responsible for delivering to the intended recipient, please (1) be advised that any use, dissemination, forwarding, or copying of this document IS STRICTLY PROHIBITED; and (2) notify sender immediately by telephone and destroy the document. THANK YOU.
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:45 GMT-3