From: Chris Johnston (chris@routerguy.com)
Date: Mon May 19 2003 - 04:36:41 GMT-3
Then again... Why not just route all of that traffic and use the router
on the other end to trunk to the switch. After all, you are just
routing networks anyway.
Chris Johnston
714-306-5746
949-653-8819 (fax)
Cannot find REALITY.SYS. Universe halted.
-------------------------------------------------------------------
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Erick B.
Sent: Friday, April 18, 2003 5:25 PM
To: ccielab@groupstudy.com
Subject: VLAN over WAN - DLSW or other method?
Hi,
I know this is sort of off-topic. Just was wondering
if anyone has ever tried to use DLSW to bridge a VLAN
between 2 sites over a routed WAN network. I have DLSW
up and the VLAN sub interface is receiving traffic for
each ping I'm doing from a host but the traffic
doesn't appear to be picked up by DLSw and passed
across the DLSW connection to other router and out the
LAN interface there.
Anyone know of any other solutions to get this to work
besides plain bridging, with just routers?
Thanks, Erick
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:45 GMT-3