PPP mystery

From: lg01 (lg01@myway.com)
Date: Sun May 18 2003 - 10:43:46 GMT-3

• Next message: Tony Schaffran: "RE: PPP mystery"
• Previous message: Ram Shummoogum: "RE: Problems with OSPF & Dialer Watch"
• Next in thread: Tony Schaffran: "RE: PPP mystery"
• Maybe reply: Tony Schaffran: "RE: PPP mystery"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Team,

I have been playing with PPPoFR today. One thing that stumped me though is that even though Virtual-Access interface is "up up", the "Virtual-Template" interfaces stay as "down down", even though I can still ping the other side over the PPPoFR link.

R1 ---- R2

Is that normal?

At R1:-

frame-relay switching

interface Virtual-Template1
 bandwidth 128
 ip address 172.150.2.1 255.255.255.0
 ip bandwidth-percent eigrp 100 25
!
interface Serial0
 no ip address
 encapsulation frame-relay
 clockrate 125000
 frame-relay lmi-type cisco
 frame-relay intf-type dce
!
interface Serial0.1 point-to-point
 frame-relay interface-dlci 16 ppp Virtual-Template1

And as for R2:-

interface Virtual-Template1
 bandwidth 128
 ip address 172.150.2.2 255.255.255.0
 ip bandwidth-percent eigrp 100 25

interface Serial1
 no ip address
 encapsulation frame-relay
 frame-relay lmi-type cisco
!
interface Serial1.1 point-to-point
 frame-relay interface-dlci 16 ppp Virtual-Template1

Any help would be greatly appreciated.

Regards,
Hunt

• Next message: Tony Schaffran: "RE: PPP mystery"
• Previous message: Ram Shummoogum: "RE: Problems with OSPF & Dialer Watch"
• Next in thread: Tony Schaffran: "RE: PPP mystery"
• Maybe reply: Tony Schaffran: "RE: PPP mystery"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:44 GMT-3