From: Hale, Wendy (WRHale@NECBNS.com)
Date: Sat May 17 2003 - 14:15:08 GMT-3
Does anyone have a way of generating T1 errors with back-to-back serial
cables if I wanted to test LQM in the lab?
-----Original Message-----
From: Tim Fletcher [mailto:tim@fletchmail.net]
Sent: Friday, May 16, 2003 1:25 PM
To: yuki hisano; ccielab@groupstudy.com
Subject: Re: ISDN question
How about using PPP encap on the T1 with LQM.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdia
l_c/fnsprt9/dcdppp.htm#1001080
-Tim Fletcher #11406
At 06:22 PM 5/16/2003 +0000, yuki hisano wrote:
>Group,
>
>I have a question. I have an ISDN backup for a T1 primary circuit. As most
>of you know, some carriers do not have very reliable quality on their
>circuits. Sometimes we have unacceptable errors on this T1 circuit.
>My question is, is there any ways you can bring the ISDN up automatically
>by receiving a certain amount of errors on the primary circuit?
>That would be nice if there is a way to do this.
>
>Thanks!
>
>Yuki
>
>_________________________________________________________________
>Add photos to your messages with MSN 8. Get 2 months FREE*.
>http://join.msn.com/?page=features/featuredemail
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:44 GMT-3