From: Larson, Chris (CLarson@usaid.gov)
Date: Fri May 16 2003 - 12:43:32 GMT-3
Are you sure about this? This has not been my experience and maybe I do not
understand what you are trying to convey?
If you have router ospf 1 on one router and router ospf 2 on another router,
these routers will not exchange routing info.
-----Original Message-----
From: Scott Morris [mailto:swm@emanon.com]
Sent: Wednesday, May 14, 2003 4:25 PM
To: 'Jung, Jin'; 'keyser soze'; ccielab@groupstudy.com
Subject: RE: OSPF basic configuration problem
The process id is locally significant only, so it doesn't matter what number
you pick, or whether they match or not.
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jung, Jin
Sent: Wednesday, May 14, 2003 1:48 PM
To: 'keyser soze'; ccielab@groupstudy.com
Subject: RE: OSPF basic configuration problem
You have two different process running on each router,
Router 1 ospf 1
Router 2 ospf 2
Try to run on same process, and see if it will work for you.
Jin jung...
-----Original Message-----
From: keyser soze [mailto:soze39@hotmail.com]
Sent: Wednesday, May 14, 2003 3:29 AM
To: ccielab@groupstudy.com
Subject: OSPF basic configuration problem
Hi all.
I've a problem configuring OSPF between two routers via ethernet. The sh ip
route only shows directly connected networks. I'm pasting the running config
below. Any help would be appreciated.
---- R1 -----
hostname R1
interface Loopback0
ip address 131.108.4.1 255.255.255.128
!
interface Loopback1
ip address 131.108.4.129 255.255.255.128
!
interface Loopback2
ip address 131.108.5.1 255.255.255.224
!
interface Ethernet0
ip address 131.108.1.1 255.255.255.0
!
interface Serial0
no ip address
shutdown
no fair-queue
!
interface Serial1
no ip address
shutdown
!
interface BRI0
no ip address
shutdown
!
router ospf 1
log-adjacency-changes
network 131.108.1.0 0.0.0.255 area 1
network 131.108.4.0 0.0.0.127 area 1
network 131.108.4.128 0.0.0.127 area 1
network 131.108.5.0 0.0.0.31 area 1
!
ip classless
ip http server
---- R1 -----
hostname R2
!
!
!
!
!
!
ip subnet-zero
!
!
!
!
!
!
interface Loopback0
ip address 131.108.5.3 255.255.255.224
!
interface Loopback1
ip address 131.108.6.1 255.255.255.255
!
interface Loopback2
ip address 131.108.6.2 255.255.255.255
!
interface Ethernet0
ip address 131.108.1.2 255.255.255.0
!
interface Serial0
no ip address
shutdown
no fair-queue
!
interface Serial1
no ip address
shutdown
!
router ospf 2
log-adjacency-changes
network 131.108.1.0 0.0.0.255 area 1
network 131.108.5.32 0.0.0.31 area 1
network 131.108.6.1 0.0.0.0 area 1
network 131.108.6.2 0.0.0.0 area 1
!
ip classless
ip http server
Thanks.
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:44 GMT-3