From: love cisco (love_cisco@hotmail.com)
Date: Thu May 15 2003 - 17:56:58 GMT-3
Yes, I did "clear ip bgp *" then reload the router.
Normally I will reload the router first then ask the procotor.
>From: Ivan <limmti@yahoo.com.sg>
>Reply-To: Ivan <limmti@yahoo.com.sg>
>To: love cisco <love_cisco@hotmail.com>
>CC: ccielab@groupstudy.com
>Subject: Re: redistribute bgp into rip problem
>Date: Fri, 16 May 2003 00:34:21 +0800 (CST)
>
>Hi,
>
>Did you do a "clear ip bgp *" to reset the bgp connection?
>
>Thanks
>Ivan
>
>love cisco <love_cisco@hotmail.com> wrote:
>R1-----------R2-----------------R3------------R4
>Rip Rip/BGP(AS32) BGP(AS32)/EIGRP Eigrp
>
>I want redistribute bgp into rip, but rip router R1 can not see bgp
network
>192.168.109.0/24 and 135.4.10.0 which is in R2 routing table. Any idea?
>
>Here is the config in R2
>
>R2#
>interface Serial1.1 multipoint
>ip address 192.168.1.6 255.255.255.0
>no arp frame-relay
>frame-relay map ip 192.168.1.5 555 broadcast
>frame-relay map ip 192.168.1.6 555
>no frame-relay inverse-arp
>!
>router rip
>version 2
>redistribute bgp 32 metric 1
>network 192.168.1.0
>no auto-summary
>!
>router bgp 32
>no synchronization
>bgp redistribute-internal
>redistribute rip
>neighbor 192.168.69.9 remote-as 32
>no auto-summary
>
>R2#sh ip bgp
>BGP table version is 5, local router ID is 192.168.6.6
>Status codes: s suppressed, d damped, h history, * valid, > best, i -
>internal
>Origin codes: i - IGP, e - EGP, ? - incomplete
>
>Network Next Hop Metric LocPrf Weight Path
>*>i135.4.10.0/24 192.168.109.10 2297856 100 0 ?
>*> 192.168.1.0 0.0.0.0 0 32768 ?
>*> 192.168.5.0 192.168.1.5 1 32768 ?
>*>i192.168.109.0 192.168.69.9 0 100 0 ?
>R2#sh ip route
>
>B 192.168.109.0/24 [200/0] via 192.168.69.9, 03:06:41
>R 192.168.5.0/24 [120/1] via 192.168.1.5, 00:00:23, Serial1.1
>C 192.168.6.0/24 is directly connected, Loopback0
>C 192.168.1.0/24 is directly connected, Serial1.1
>C 192.168.69.0/24 is directly connected, Serial0.1
>C 192.168.2.0/24 is directly connected, Serial1.2
>135.4.0.0/24 is subnetted, 1 subnets
>B 135.4.10.0 [200/2297856] via 192.168.109.10, 03:05:41
>R2#
>
>Configuration in R1
>
>R1#
>interface Serial1.1 multipoint
>ip address 192.168.1.5 255.255.255.0
>no arp frame-relay
>frame-relay map ip 192.168.1.5 555
>frame-relay map ip 192.168.1.6 555 broadcast
>no frame-relay inverse-arp
>!
>router rip
>version 2
>network 192.168.1.0
>no auto-summary
>
>R1#sh ip route
>
>C 192.168.5.0/24 is directly connected, Loopback0
>R 192.168.6.0/24 [120/1] via 192.168.1.6, 00:00:10, Serial1.1
>C 192.168.1.0/24 is directly connected, Serial1.1
>R 192.168.69.0/24 [120/1] via 192.168.1.6, 00:00:10, Serial1.1
>C 192.168.2.0/24 is directly connected, Serial1.2
>R1#
>
>_________________________________________________________________
>Cb7QOBTX MSN Explorer: http://explorer.msn.com/lccn/
> Yahoo! Biztools
>- Promote your business from just $5 a month!
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:43 GMT-3