RE: TCP ping

From: Tim Fletcher (tim@fletchmail.net)
Date: Wed May 14 2003 - 18:14:01 GMT-3

• Next message: Anthony Pace: "Re: IPSEC between PIX's- From LAN to remote DMZ"
• Previous message: Jung, Jin: "RE: Converting Custom Queue to CBWFQ"
• Maybe in reply to: Jason Graun: "TCP ping"
• Next in thread: Mohamed, Liban [NTWK SVCS]: "RE: TCP ping"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This might help.
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/ip.htm
Look at the 1st figure (30-1), then skip down to the ICMP section.

-Tim Fletcher #11406

At 01:40 PM 5/14/2003 -0500, Jason Graun wrote:
>Cool what TCP port does ICMP use?
>
>-----Original Message-----
>From: Lance Cockcroft [mailto:lcockcroft@SelfTestSoftware.com]
>Sent: Wednesday, May 14, 2003 1:30 PM
>To: Jason Graun; ccielab@groupstudy.com
>Subject: RE: TCP ping
>
>Ping does not use a TCP port number since it is a network layer protocol.
>
>Lance Cockcroft
>Cisco Product Manager
>770-643-3635
>
>
>
>
>
>
>
>
>
>-----Original Message-----
>From: Jason Graun [mailto:jgraun@attbi.com]
>Sent: Wednesday, May 14, 2003 12:50 PM
>To: ccielab@groupstudy.com
>Subject: TCP ping
>
>What TCP port does ping use?
>
>
>
>
>
>Thanks for the help

• Next message: Anthony Pace: "Re: IPSEC between PIX's- From LAN to remote DMZ"
• Previous message: Jung, Jin: "RE: Converting Custom Queue to CBWFQ"
• Maybe in reply to: Jason Graun: "TCP ping"
• Next in thread: Mohamed, Liban [NTWK SVCS]: "RE: TCP ping"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:43 GMT-3