From: Walker, James, IS (JWALKER2@PARTNERS.ORG)
Date: Wed May 14 2003 - 16:43:17 GMT-3
Hi,
I have a LS1010 that fails during power on and shows a port being bad, but the
port is working. If I reload the ASP the bad port moves to another port. I
remember there was a bug for this somewhere, but I'm unable to locate it.
Does this ring a bell with someone?
LS1010 is in a 5500 which also has a RSM.
Thanks in advance,
Jim
asp#sh ver
Cisco Internetwork Operating System Software
IOS (tm) LS1010 WA4-5 Software (LS1010-WP-M), Version 12.0(20)W5(24a) RELEASE S
OFTWARE
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 05-Feb-02 17:19 by integ
Image text-base: 0x60010930, data-base: 0x60AEE000
ROM: System Bootstrap, Version 11.2(1.4.WA3.0) [integ 1.4.WA3.0], RELEASE
SOFTWARE
asp uptime is 9 weeks, 2 days, 12 hours, 17 minutes
System restarted by power-on at 02:20:10 EST Mon Mar 10 2003
Running default software
cisco LS1015 (R4600) processor with 65536K bytes of memory.
R4700 processor, Implementation 33, Revision 1.0
Last reset from power-on
1 Ethernet/IEEE 802.3 interface(s)
22 ATM network interface(s)
123K bytes of non-volatile configuration memory.
8192K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
8192K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
asp#sh diag power-on
LS1010 Power-on Diagnostics Status (.=Pass,F=Fail,U=Unknown,N=Not Applicable)
-----------------------------------------------------------------------------
Last Power-on Diags Date: 03/03/10 Time: 01:08:59 By: V 4.54
BOOTFLASH: . PCMCIA-Slot0: N PCMCIA-Slot1: N
CPU-IDPROM: . FCard-IDPROM: . NVRAM-Config: .
SRAM: . DRAM: .
PS1: . PS2: . PS (12V): .
FAN: . Temperature: . Bkp-IDPROM: .
MMC-Switch Access: . Accordian Access: .
LUT: . ITT: . OPT: . OTT: . STK: . LNK: . ATTR: . Queue: .
Cell-Memory: .
Feature-Card Access: .
ICC: . OCC: . OQP: . OQE: . CC: . RT: .
TM0: . TM1: . TMC: . IT: . LT: . RR: . ABR: .
Access/Interrupt/Loopback Test Status:
Ports 0 1 2 3
----------------------------------------------------------------------------
PAM 10/0(155MM) ..F ... ... ...
PAM 10/1(155MIXD) ... ... ... ...
PAM 11/0(T1CE) ... ... ... ...
PAM 11/1(155MM) ... ... ... ...
PAM 12/0(DS3Q) ... ... ... ...
PAM 12/1(155MIXD) ... ... ... ...
FRPAM# ING-SSRAM ING-SDRAM EGR-SSRAM EGR-SDRAM LOOPBACK
------------------------------------------------------------------
Ethernet-port Access: . Ethernet-port CAM-Access: .
Ethernet-port Loopback: . Ethernet-port Loadgen: .
GEPAM Microcode: . GEPAM Access: .
GEPAM CAM Access: .
A4:ATM Layer Loopback Test [PM2P0,VP,Q,PHY,ASP_OSC]
*** ATMDIAG_UNEXPECTED_PIF_INTERRUPT_ERROR *** [Addr:A8000004, exp:00000010, ac
t:00000098]
Power-on Diagnostics Failed.
asp#
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:43 GMT-3