From: Tony Schaffran (tschaffran@cconlinelabs.com)
Date: Wed May 14 2003 - 14:20:51 GMT-3
I assume you have an area 0 somewhere in your network?
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA
NNCDS, NNCSS, CNE, MCSE
http://www.cconlinelabs.com/
Your #1 choice for online cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
keyser soze
Sent: Wednesday, May 14, 2003 12:29 AM
To: ccielab@groupstudy.com
Subject: OSPF basic configuration problem
Hi all.
I've a problem configuring OSPF between two routers via ethernet. The sh ip
route only shows directly connected networks. I'm pasting the running config
below. Any help would be appreciated.
---- R1 -----
hostname R1
interface Loopback0
ip address 131.108.4.1 255.255.255.128
!
interface Loopback1
ip address 131.108.4.129 255.255.255.128
!
interface Loopback2
ip address 131.108.5.1 255.255.255.224
!
interface Ethernet0
ip address 131.108.1.1 255.255.255.0
!
interface Serial0
no ip address
shutdown
no fair-queue
!
interface Serial1
no ip address
shutdown
!
interface BRI0
no ip address
shutdown
!
router ospf 1
log-adjacency-changes
network 131.108.1.0 0.0.0.255 area 1
network 131.108.4.0 0.0.0.127 area 1
network 131.108.4.128 0.0.0.127 area 1
network 131.108.5.0 0.0.0.31 area 1
!
ip classless
ip http server
---- R1 -----
hostname R2
!
!
!
!
!
!
ip subnet-zero
!
!
!
!
!
!
interface Loopback0
ip address 131.108.5.3 255.255.255.224
!
interface Loopback1
ip address 131.108.6.1 255.255.255.255
!
interface Loopback2
ip address 131.108.6.2 255.255.255.255
!
interface Ethernet0
ip address 131.108.1.2 255.255.255.0
!
interface Serial0
no ip address
shutdown
no fair-queue
!
interface Serial1
no ip address
shutdown
!
router ospf 2
log-adjacency-changes
network 131.108.1.0 0.0.0.255 area 1
network 131.108.5.32 0.0.0.31 area 1
network 131.108.6.1 0.0.0.0 area 1
network 131.108.6.2 0.0.0.0 area 1
!
ip classless
ip http server
Thanks.
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:42 GMT-3