RE: summary address's distance

From: Joe Martin (jmartin@capitalpremium.net)
Date: Tue May 13 2003 - 13:03:29 GMT-3

• Next message: Armand D: "WPA support on Aironet Products"
• Previous message: Rick Lowery: "Huge LAB for sale in the DC/ Virginia area Must see!"
• Maybe in reply to: Tom Young: "summary address's distance"
• Next in thread: huang gang: "Re: summary address's distance"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Tom,

AD is locally significant. There is no way to change the AD for a route on
a remote router.

The AD option in the ip summary-address eigrp command is used to allow the
router to advertise a summary route without installing it in the routing
table.

Please see the command reference for this command at:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_r
/iprprt2/1rdeigrp.htm#1018086

Watch the wrap.

HTH,

Joe Martin

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Tom
Young
Sent: May 13, 2003 8:12 AM
To: ccielab@groupstudy.com
Subject: summary address's distance

Hi, group

 I set the summary command on wan interface, the next
route received the summary address. But the distance is
not displayed 5, still is 90. WHY?

ip summary-address eigrp 3 151.100.32.0 255.255.252.0 5

Thanks alot

• Next message: Armand D: "WPA support on Aironet Products"
• Previous message: Rick Lowery: "Huge LAB for sale in the DC/ Virginia area Must see!"
• Maybe in reply to: Tom Young: "summary address's distance"
• Next in thread: huang gang: "Re: summary address's distance"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:41 GMT-3