ospf/rip VLSM

From: Ram Shummoogum (rshummoo@ca.ibm.com)
Date: Mon May 12 2003 - 17:24:40 GMT-3

• Next message: kasturi cisco: "RE: originate vs originate always"
• Previous message: kasturi cisco: "RE: originate vs originate always"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

                 Area 12
            r1-------------r2------ripv1-------r4
                       |
                       |Area 0
                       |
                       r5

r1 to r2 have 172.29.12.0/26
r2 to r1 is 172.29.24.0/24
r2 to r5 is 172.29.100.0/29

For r4 to learn 172.29.12.0, I summarize as the following on r2 and
redistribute ospf into rip. I also redistributed connected into rip
Area 12 range 172.29.12.0 255.255.255.0

I do not see the route in r4.

Any ideas?

Thanks.
RAM

• Next message: kasturi cisco: "RE: originate vs originate always"
• Previous message: kasturi cisco: "RE: originate vs originate always"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:41 GMT-3