PPP MULTILINK

From: Silvio Nunes (silvio_98@hotmail.com)
Date: Sun May 11 2003 - 10:26:40 GMT-3

• Next message: Jean-Francois Vaillancourt: "Re: ospf conditional advertisement"
• Previous message: Nguyen Hoang Long: "Class-based shaping"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Group,

R1 -------- ISDN ----------R2

R1 configuration:
interface BRI0/0
ip address 172.16.12.1 255.255.255.0
encapsulation ppp
ip ospf cost 9999
ip ospf demand-circuit
dialer idle-timeout 30
dialer map ip 172.16.12.2 name R2 broadcast 8358662
dialer load-threshold 1 outbound
dialer-group 1
isdn switch-type basic-ni
isdn spid1 0835866101 8358661
isdn spid2 0835866301 8358663
no peer neighbor-route
ppp authentication chap callin
ppp multilink

My problem is: from R1, PPP authentication chap callin works only for the
first channel with ppp multilink (BRI0/0:1), for the second channel
(BRI0/0:2), R1 challenges R2. Why ?

*** PPP authentication chap callin command is configured on Router R1 ***

Thank4s

• Next message: Jean-Francois Vaillancourt: "Re: ospf conditional advertisement"
• Previous message: Nguyen Hoang Long: "Class-based shaping"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:40 GMT-3