Re: Catalyst 3550 problem

From: phase90 (phase90@comcast.net)
Date: Sat May 10 2003 - 10:39:33 GMT-3


John,

            Even though you may have a vlan 2 defined on the switch, you may
not, or for security reasons want to route to it. This is the same message
that appears on the IOS based Catalyst switches when the vlan interface is
not yet defined. Just go in to config and enter

interface vlan2

Jerry
----- Original Message -----
From: John Tafasi <johntafasi@yahoo.com>
To: ccielab <ccielab@groupstudy.com>
Sent: Friday, May 09, 2003 9:57 PM
Subject: Catalyst 3550 problem

> Hi Group,
>
> When I execute the following command on a 3550 catalyst switch I receive
an
> unexpected error. Can some one find out what is the reason for this? I
have
> included a "show version" command at the end of this message.
>
> Thanks
> John Tafasi
>
>
>
> 3550#show ip interface vlan 2
> ^
> % Invalid input detected at '^' marker.
>
>
> 3550#show ip interface vlan 1
> Vlan1 is administratively down, line protocol is down
> Internet protocol processing disabled
> 3550#
>
> 3550#show vlan
>
> VLAN Name Status Ports
> ---- -------------------------------- --------- --------------------------

--
> ---
> 1    default                          active    Fa0/1, Fa0/2, Fa0/3, Fa0/4
>                                                 Fa0/5, Fa0/6, Fa0/7, Fa0/8
>                                                 Fa0/9, Fa0/10, Fa0/11,
> Fa0/12
>                                                 Fa0/13, Fa0/14, Fa0/15,
> Fa0/16
>                                                 Fa0/17, Fa0/18, Fa0/19,
> Fa0/20
>                                                 Fa0/21, Fa0/22, Fa0/23,
> Fa0/24
>                                                 Gi0/1, Gi0/2
> 2    vlan2                            active
> 1002 fddi-default                     active
> 1003 token-ring-default               active
> 1004 fddinet-default                  active
> 1005 trnet-default                    active
>
> VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1
> Trans2
> ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ --
--
> --
> 1    enet  100001     1500  -      -      -        -    -        0      0
> 2    enet  100002     1500  -      -      -        -    -        0      0
> 1002 fddi  101002     1500  -      -      -        -    -        0      0
> 1003 tr    101003     1500  -      -      -        -    -        0      0
> 1004 fdnet 101004     1500  -      -      -        ieee -        0      0
>
> VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1
> Trans2
> ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ --
--
> --
> 1005 trnet 101005     1500  -      -      -        ibm  -        0      0
>
> Remote SPAN VLANs
> --------------------------------------------------------------------------
--
> --
>
>
> Primary Secondary Type              Ports
> ------- --------- ----------------- --------------------------------------
--
> --
>
> 3550#


This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:40 GMT-3