From: jfaure@sztele.com
Date: Fri May 09 2003 - 06:23:19 GMT-3
Hi all:
We have a 6500 switch with a flex wan card to support POS interfaces. We
are using catos 6.3.8 and IOS (msfc) 12.1.8bE11. The problem we have is
that the POS interface only appears in one of the two msfcs we have in the
chassis (we have two SP cards & 2 msfcs).
Anyone knows if this is normal? Supposing the main SP goes down, then
you`d need to configure the second msfcs for operating with the pos
interfaces. It seems a very limited implementation, if this is so.
Any help would be apreciated.
Regards
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------
SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:39 GMT-3