From: Robert Yee (robert@bluespud.com)
Date: Fri May 09 2003 - 04:37:46 GMT-3
Hi All,
I've been reading about configuring Auto-RP and also Multicast over NBMA (in this case, frame-relay). All the literature point to these 2 things:
1. The use Auto-RP, the routers should be configured for 'sparse-dense-mode'
2. To use 'ip pim nbma-mode' accross a frame relay network, the routers should be configured for 'sparse' mode
So what if you want to configure Auto-RP over NBMA? All the stuff I read only points to where to place the MA, but does not say whether to use 'sparse-dense' or 'sparse'?
Can anyone shed some ligh on this?
TIA,
Robert
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:39 GMT-3