From: John Mistichelli (jmistichelli@yahoo.com)
Date: Wed May 07 2003 - 18:48:46 GMT-3
Hi,
Can you provide configs. Maybe we can figure out why
its not working.
John
7536
_______________________
http://www.routopia.com
Your source for remote CCIE equipment rental. We have
ATM, ISDN, Catalyst 3550, lab scenarios and more. All
at a low low rental price. No source will give you a
more comprehensive solution at such a low price.
Guaranteed!
--- Robert Yee <robert@bluespud.com> wrote:
> Hi all,
>
> I've been playing around with ppp callback. I've
> gotten the ppp callback portion to work correctly.
> However, when I add callback to my ospf demand
> circuit config, the demand circuit stops working.
>
> Logically, it makes no sense to configure both
> because, to me, callback takes advantage of cheaper
> dialing rates. If that were the case in real life,
> then why bother with callback at all. Just configure
> a demand-circuit with a dialer map on the side with
> cheaper rates.
>
> But, in this lab scenario, I'm trying to both to
> work together with no luck.
>
> I see that IPExpert's lab 20 has both configured?
>
> Any ideas? Thanks,
>
> Rob
=====
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:38 GMT-3