From: Tim Fletcher (tim@fletchmail.net)
Date: Wed May 07 2003 - 16:01:09 GMT-3
Just configure the clock rate on the other end of the cable. The
frame-relay intf-type dce command, defines the frame relay switching
function, not the physical interface. It will work fine on a physical DTE
interface.
-Tim Fletcher
At 05:26 PM 5/7/2003 +0200, naresh wrote:
>Hello Group,
>
>I have a 8-port serial adapter on a 7200 series router, with a octal cable.
>what i basically need to do is , configure one port for frame-relay
>encapsulation and as a dce port .
>
>The problem is , when i do sh controllers serial port, it shows up as a DTE
>port,
>I have configured the serial port, as frame-relay intf-type dce as well as
>frame-switching but i cannot configure the clockrate command (command not
>available under intf mode) since i believe the cable is DTE.
>Need a confirmation, To make a serial interface , DCE with FR encap, we need
>the clockrate command as well.
>
>Actually i am in a fix, bcos its a Octal cable, and this router has to be DCE,
>or can i convert one of the legs of the octal cable to DCE by attaching one
>more cable.
>
>Pls advise
>
>Thanks
>Naresh
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:38 GMT-3