ospf 's neighbor id

From: Tom Young (gitsyoung@yahoo.co.jp)
Date: Wed May 07 2003 - 11:43:37 GMT-3

• Next message: adtt@gmx.net: "Re: ospf version"
• Previous message: Wright, Jeremy: "RE: PIX 501 Default Configuration"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

hi, group

    Router 1,3,5 are in the ospf non_broadcast network, r1
is the hub, after I set r3's router-id, in r1's ospf
neighbor table, the old neighbor ip of r3 become N/A, and
not disappeared, how to cancel it?

Thanks

r1#sh ip os ne

Neighbor ID Pri State Dead Time Address
       Interface
172.168.32.1 1 FULL/ - 00:00:35
137.20.100.1 Serial0.1
137.20.3.65 0 FULL/DROTHER 00:01:51
137.20.101.3 Serial0.2
137.20.101.5 0 FULL/DROTHER 00:01:34
137.20.101.5 Serial0.2
N/A 0 ATTEMPT/DROTHER -
137.20.101.3 Serial0.2
r1#

• Next message: adtt@gmx.net: "Re: ospf version"
• Previous message: Wright, Jeremy: "RE: PIX 501 Default Configuration"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:38 GMT-3