Re: ospf's load balance

From: Tim Fletcher (tim@fletchmail.net)
Date: Tue May 06 2003 - 12:01:35 GMT-3

• Next message: Tim Fletcher: "Re: ISDN Backup Interface"
• Previous message: kasturi cisco: "RE: mutually redistributes rip & ospf"
• Maybe in reply to: Tom Young: "ospf's load balance"
• Next in thread: John Mistichelli: "Re: ospf's load balance"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

OSPF does do equal cost load balancing by default. You can change this by
changing the maximum-paths.

-Tim Fletcher #11406

At 11:29 AM 5/6/2003 +0900, Tom Young wrote:
>Hi, group
>
> Part of the sh ip route command as below, I couldn't
>believe the ospf could load balance, does it right?
>
>Thanks
>
>O E2 192.168.236.0/24 [110/20] via 192.168.200.19,
>18:05:30, FastEthernet0
> [110/20] via 192.168.200.18,
>18:05:30, FastEthernet0
>
>
>__________________________________________________
>Do You Yahoo!?
>Yahoo! BB is Broadband by Yahoo! http://bb.yahoo.co.jp/

• Next message: Tim Fletcher: "Re: ISDN Backup Interface"
• Previous message: kasturi cisco: "RE: mutually redistributes rip & ospf"
• Maybe in reply to: Tom Young: "ospf's load balance"
• Next in thread: John Mistichelli: "Re: ospf's load balance"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:38 GMT-3