From: Jung, Jin (jin.jung@lmco.com)
Date: Tue May 06 2003 - 09:32:29 GMT-3
I believe that question looks like metric adjustment question,,
You have to think that what in EIGRP metric can "ATM CRC" cause to change
its metric.
Bandwidth delay reliability load MTU,,
????
-- by default only the bandwidth and delay K value can reflect EIGRP metric,
In this case, you need to enable one of above K value to 1 ,,
My guess would be you have to enable reliability for EIGRP...
Jin jung...
-----Original Message-----
From: Joe Chang [mailto:changjoe@earthlink.net]
Sent: Monday, May 05, 2003 9:35 PM
To: Sean C.; ccielab@groupstudy.com
Subject: Re: EIGRP and ATM CRCs
Decrease the EIGRP hello interval, and decrease the hold time so that it is
something closer to the hello interval. For example 10 seconds hello, 20
seconds hold time.
----- Original Message -----
From: "Sean C." <Upp_and_Upp@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Monday, May 05, 2003 8:48 PM
Subject: EIGRP and ATM CRCs
> Hello all,
>
> Found this question on the sample exam from IPExperts and I can't
> figure
out
> the answer. Any clues??
> http://www.ipexpert.net/products/itemdetail.asp?SKU=ip0001
>
> "It has seen lots of time that ATM interface generates CRC errors.
> Configure EIGRP such upon getting such errors on any particular router
will
> automatically reflect to EIGRP toplolgy of all routers in EIGRP AS."
>
> TIA,
> Sean
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:37 GMT-3