From: FATHALLAH (sfathallah@mail.cbi.net.ma)
Date: Tue May 06 2003 - 07:55:25 GMT-3
witch map-class you are talking about? according to your config you
configure the isdn caller callback and not ppp callback, so the map-class is
not required and can be an opposit of the lab requirement ( you know in
ccie, the choice of the implementation method is very important ) . also i
didnt tell you that "isdn caller id" is required, it's just a mean to test
that your switch deliver the "caller id" number witch is the requirement of
"isdn caller callback" configuration to work proprely.
Said FATHALLAH.
-----Message d'origine-----
De : Peng Zheng [mailto:zpnist@yahoo.com]
Envoyi : lundi 5 mai 2003 21:09
@ : sfathallah@mail.cbi.net.ma
Objet : RE: ISDN callback
As John said, map-class name is not matching. After I
changed it, it is ok.
In my lab, "isdn caller id" is not required.
--- FATHALLAH <sfathallah@mail.cbi.net.ma> wrote:
> hi peng.
> your config is right. but the callerId callback
> methode need your isdn
> switch to deliver the callerId. make sure that it
> get it. you can test this
> by securing caller ID " isdn caller id "
>
> let me know.
>
> Said FATHALLAH
>
> -----Message d'origine-----
> De : nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]De la part de
> Peng Zheng
> Envoyi : mardi 29 avril 2003 22:17
> ?: ccielab@groupstudy.com
> Objet : ISDN callback
>
>
> Hi,
> I tried to config callback according:
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_
> c/dccallid.htm
>
> I have r3 and r5, on r3 I use int bri 0, on r5, I
> use
> int bri 1.
>
> Before callback, on r3
> ---------------
>
>
> interface BRI0
> ip address 135.35.35.3 255.255.255.240
> encapsulation ppp
> no ip route-cache
> no ip mroute-cache
> dialer map ip 135.35.35.5 name r5 broadcast
> 4082222222
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 40811111111 4081111111
> isdn spid2 40811111112 4081111111
> ppp authentication chap
> dialer-list 1 protocol ip permit
>
>
> on r5:
>
> interface BRI1
> ip address 135.35.35.5 255.255.255.240
> encapsulation ppp
> dialer map ip 135.35.35.3 name r3 broadcast
> 4081111111
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 40822222221 4082222222
> isdn spid2 40822222222 4082222222
> ppp authentication chap
>
> dialer-list 1 protocol ip permit
>
> -------------------------------------------
>
> It works well. Then I added:
>
> dialer enable-timeout 2
> isdn caller 4082222222 callback
>
> on r3, and
>
> dialer wait-for-carrier-time 4
> on r5.
>
> Then I tried to ping r3 int bri 0 from r5, but int
> bri
> on both them weren't brought up. when I use: sh
> dialer,
>
> It's said a callback failure.
>
> Does anyone know what's the problem or any
> suggestion?
>
> Thanks.
>
>
>
>
> __________________________________
> Do you Yahoo!?
> The New Yahoo! Search - Faster. Easier. Bingo.
> http://search.yahoo.com
>
>
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:37 GMT-3