From: Ozgur Rascall (polarccie@yahoo.co.uk)
Date: Mon May 05 2003 - 09:09:48 GMT-3
u can specify idle-timers per user with
username [name] autocommand access-enable host timeout
config command...
i hope this will do...
cco tells idle and absoulte timeouts does the same
thing, clearing the dynamic acl after a given time,as
also shown in the example
http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_configuration_guide_chapter09186a00800d9814.html#27952
but there is an old post that gives a somewhat
different definition for idle timeout...
http://www.groupstudy.com/archives/ccielab/200102/msg01231.html
any comments?
--- Emad <emad@zakq8.com> wrote: > How can I limit
user access time , I read about
> putting the command "autocommand access-enable
> timeout " under line vty 0 4 ,
> It it right and how can I differentiate between
> different local users to give different time
> allowance
> regards
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:37 GMT-3