From: Nguyen Hoang Long (ng-hlong@hn.vnn.vn)
Date: Sat May 03 2003 - 01:27:51 GMT-3
Both will be advertised, but the Domain does not match, they will not form
neighborship.
BTW, I have concerns here for VTP Client side:
+ if VTP is configured as Client, all VTP information is not saved in
NVRAM , so it will NOT be preserved after reboot.
In the Lab, proctor will do rebooting before grading, it means that my
Client config will be lost. How can I get points for this !!?
any ideas ?
Thanks,
Long.
----- Original Message -----
From: "Tom Young" <gitsyoung@yahoo.co.jp>
To: <ccielab@groupstudy.com>
Sent: Saturday, May 03, 2003 9:00 AM
Subject: VTP domain name
> Some work was found in cisco homepage as blow,
>
> "If a switch has no VTP domain name configured, it will
> receive the VTP domain name from an
> attached switch through the trunk port (if one is
> available). The switch configuration defaults to a
> VTP server, without a VTP domain name. When a new set of
> Catalysts are connected by a trunk, you
> only need to configure the VTP domain name on one switch.
> The other switches will be notified of
> the VTP domain name through the first summary
> advertisement."
>
> But if I had set the vtp domain name in two switchs with
> TWO diffirent name , which one will be advertised?
>
> Thanks alot
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! BB is Broadband by Yahoo! http://bb.yahoo.co.jp/
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:36 GMT-3