From: kym blair (kymblair@hotmail.com)
Date: Fri May 02 2003 - 19:49:48 GMT-3
Tom,
You are correct; area range is for summarizing from an ospf area into the
backbone, and summary-address is for summarizing as routes are redistributed
into ospf (from other routing protocols, connected, or static).
HTH, Kym
>From: Tom Young <gitsyoung@yahoo.co.jp>
>Reply-To: Tom Young <gitsyoung@yahoo.co.jp>
>To: ccielab@groupstudy.com
>Subject: summary command of ospf Date: Sat, 3 May 2003 00:26:19 +0900 (JST)
>
>Hi, group
>
> Look the sample blow, there are two summary-address was
>worte. I think the summary-address always used for summary
>the address that was redistributed from other routing
>protocol. So, in here, it should be
>area 5 range 150.10.65.0 255.255.255.0
>area 1 range 150.10.10.0 255.255.255.0
>
>Right ?
>
>Thanks alot
>
>
>
>router ospf 10
> log-adjacency-changes
> area 0 authentication message-digest
> area 1 virtual-link 150.10.3.3 message-digest-key 1 md5
>cisco
> area 1 virtual-link 150.10.1.1 message-digest-key 1 md5
>cisco
> area 5 authentication message-digest
> summary-address 150.10.65.0 255.255.255.0
> summary-address 150.10.10.0 255.255.255.0
> redistribute connected metric 65 subnets route-map
>con_sum
> redistribute mobile metric 65 subnets
> redistribute igrp 1 metric 65 subnets route-map
>permit_igrp
> network 150.10.5.0 0.0.0.255 area 0
> network 150.10.10.0 0.0.0.15 area 1
> network 150.10.50.0 0.0.0.255 area 0
> network 150.10.60.0 0.0.0.255 area 5
> network 150.10.65.0 0.0.0.3 area 5
> network 200.150.150.0 0.0.0.255 area 0
> neighbor 150.10.10.3
> neighbor 150.10.10.1
>!
>
>
>__________________________________________________
>Do You Yahoo!?
>Yahoo! BB is Broadband by Yahoo! http://bb.yahoo.co.jp/
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:36 GMT-3