From: Jason Cash (cash2001@swbell.net)
Date: Fri May 02 2003 - 02:05:56 GMT-3
I was running thru the NTP portion on section 19 of IPE and could not
get the NTP peers to sync to the master with this config:
ntp authentication-key 1 md5 011A1601431B031D35 7
ntp authenticate
ntp server 150.50.24.4 key 1
but when I remove key 1 from the ntp server and insert 'ntp trusted-key
1' it does sync.
CONFIG
ntp authentication-key 1 md5 011A1601431B031D35 7
ntp authenticate
ntp trusted-key 1
ntp server 150.50.24.4
Are these commands the same? What would keep the device from sync'ing? I
noticed that R2 did get the time from R4, it just was not sync'd.
(without trusted-key)
r2#sh ntp assoc
address ref clock st when poll reach delay offset disp
~150.50.24.4 127.127.7.1 8 7 64 0 33.6 320871 16000.
* master (synced), # master (unsynced), + selected, - candidate, ~
configured
(with trusted-key)
r2# sh ntp assoc
address ref clock st when poll reach delay offset disp
*~150.50.24.4 127.127.7.1 8 0 64 377 27.9 -1.23 0.1
* master (synced), # master (unsynced), + selected, - candidate, ~
configured
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:35 GMT-3