From: Joseph Rinehart (jjrinehart@hotmail.com)
Date: Mon Apr 28 2003 - 15:36:22 GMT-3
I agree with your point here, I found out in my practice sessions what kills
me is mistakes and fat fingering, or just overlooking things that cause a
train wreck later. I am sure everyone else does this already, but I have
started taking the extra step of doing testst after a given section is
completed. For example if I am redistributing protocols I make sure I can
reach the sites that have been redistributed. This is very true in practice
sessions where BGP is relying on an IGP, because without it you are hosed.
Just a thought......
----- Original Message -----
From: "Tim Fletcher" <tim@fletchmail.net>
To: "Colin Barber" <Colin.Barber@telewest.co.uk>; "'John Tafasi'"
<johntafasi@yahoo.com>; "ccielab" <ccielab@groupstudy.com>
Sent: Sunday, April 27, 2003 5:07 PM
Subject: RE: Time Saving Strategies for CCIE lab
> I have to agree with Colin. I think time saving strategies are over rated.
I know many people swear by aliases, and there have been many discussions on
the list about what aliases to use, but for me they were just something else
I would have to remember. As far as using notepad, it can be handy as a text
buffer, but in looking back, I think I used it less and less on each
attempt. When I finally passed, I don't think I used it at all (although I
did use cut and paste between terminal windows a lot).
>
> Other people have indicated that you need to be a fast typist. I type with
one finger on my left hand, 2 fingers and a thumb on my right hand, and have
to look at the keyboard a lot (you would think after 20 years at a keyboard
I would be a little better than that). But I still completed the lab 3 hours
early.
>
> I think at the most, all of these strategies couldn't make a difference of
more than a 1/2 hour, probably less. The thing to do is figure out what
works for you. But I wouldn't look at it strictly from a what's fastest
point of view. Think about how to keep your mind clear. If aliases help you
think more clearly, use them. If not don't.
>
> I think it does pay however to have an organized approach. Work out the
order that you want to configure and test your config, and practice it. If
you have a L2 problem that you didn't notice, that keeps your BGP from
working right, it will take a lot more time to troubleshoot than you could
ever save with aliases or fast fingers.
>
> -Tim Fletcher #11406
>
> At 12:51 PM 4/27/03 +0100, Colin Barber wrote:
> >As part of the move from two to one day labs most basic tasks were
removed
> >so there is no cabling to do and most of the interfaces will be set up
for
> >you.
> >
> >You can do your tasks in any order however you will need to do some
before
> >others. For example, how can you get an IGP configured and working if you
> >haven't got your wan connectivity working? Each scenario will be
different
> >but you should be able to tell what needs doing first.
> >
> >As for time saving measures if you know your stuff, can use the document
CD
> >and can read and understand the questions then time will not be a
problem.
> >We have had people stating on this list that they have finished 3+ hours
> >before the end.
> >
> >Colin
> >
> >-----Original Message-----
> >From: John Tafasi [mailto:johntafasi@yahoo.com]
> >Sent: 27 April 2003 09:55
> >To: ccielab
> >Subject: Time Saving Strategies for CCIE lab
> >
> >Hi Group,
> >
> >Since I have never taken the lab before, I would like to get advice from
> >people who have taken it as to what strategies could save you time in the
> >lab.
> >
> >Is using the notepad a good idea? If yes, how would you use it to save
time?
> >
> >Would you configure the lan switch and basic wan connectivity first?
> >
> >Is it a good idea to start by configuring ip addresses on all inerfaces
of
> >all routers before you start configuring anything else?
> >
> >Thanks
> >
> >John Tafasi
> >
>
>---------------------------------------------------------------------------
--- > >Live Life in Broadband > >www.telewest.co.uk > > > > > >The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. > >Statements and opinions expressed in this e-mail may not represent those of the company. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer. > > > > > >=========================================================================== ===
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:08 GMT-3