From: sales@ccie4u.com
Date: Mon Apr 28 2003 - 10:15:14 GMT-3
Hi Roi,
Not sure what specifically you are looking for - but two commands that will
give you a lot of information on the VIP cards are as follows:
Sh diag (tells you about the vip type, memory, etc)
Sh controller vip x tech-sup (sh tons of additional info on the vip)
When doing a sh diag you can verify the VIP type by looking at the EEPROM
output on the first line that begins with 0x20:
It's followed by 01xx where xx is 1E for vip 2/50, 21 GEIP, 22 4/80, 24 for
RSP8 and so forth.
Hope that helps,
Ian
www.ccie4u.com
Rack Rentals and Lab Scenarios starting at $20
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of roi
hermoni
Sent: Monday, April 28, 2003 6:14 AM
To: ccielab@groupstudy.com
Subject: getting inside the vip card in 7500
does anybody can remind me how can i do it.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:08 GMT-3