From: Tim Fletcher (tim@fletchmail.net)
Date: Mon Apr 28 2003 - 10:19:55 GMT-3
From a router point of view, it will only route through 172.30.0.10 if the
local interface connected to the 203.92.194.0 goes down. Just because
203.92.194.1 goes down, does not mean the local interface will go down.
Because it's a switch, I think it will work if the link to 203.92.194.1 is
the only interface in the vlan. Any other interface in the vlan will keep
the vlan interface up
-Tim Fletcher #11406
At 02:07 PM 4/28/2003 +0530, Nishant Sharma \(IT\) wrote:
>Hi John,
>
>172.30.0.10 is reachable from my cat 4006 but when 203.92.194.1 goes down
>packets don't get routed thru 172.30.0.10
>
>What may b the problem?
>
>thanx
>Nishant
>
>-----Original Message-----
>From: Jonathan V Hays [mailto:jhays@jtan.com]
>Sent: Monday, April 28, 2003 6:24 AM
>To: ccielab@groupstudy.com
>Cc: Nishant Sharma (IT)
>Subject: RE: Floating static routes not working on cat 4006 (w SUP III)
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> > Behalf Of Nishant Sharma (IT)
> > Sent: Sunday, April 27, 2003 2:44 PM
> > To: ccielab@groupstudy.com
> > Subject: Floating static routes not working on cat 4006 (w SUP III)
> >
> >
> > Dear All,
> >
> > I have configured floating static route on my cat 4006 with
> > AD of 2 , see config below - so ideally when ip interface
> > 203.92.194.1 goes down , traffic should go out through
> > 172.30.0.10 but it is not working. What I might b doing wrong ???
> >
> > ip route x.14.184.106 255.255.255.255 203.92.194.1
> > ip route x.14.184.106 255.255.255.255 172.30.0.10 2
>
>
>Check your routing table to verify that 172.30.0.10 replaces
>203.92.194.1 when the first interface goes down.
>
>Second, verify that the 172.30.0.10 is reachable from the Catalyst 4006.
>
>HTH
>
>
>-----------------------------------------------------------------------------
>--------------------------
>"The information in this e-mail is the property of Daksh and may be
>confidential and privileged. It is intended solely for the addressee.
>Access to this email by anyone else is unauthorised.
>
>If you are not the intended recipient, any disclosure, copying,
>distribution or any action taken in reliance on it is prohibited and
>may be unlawful. If you receive this message in error, please notify
>the sender immediately and delete all copies of this message."
>-----------------------------------------------------------------------------
>-------------------------
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:08 GMT-3